Plan to increase Luri hydel project capacityIllustrative image – not actual.

Satluj Jal Vidyut Nigam (SJVN) proposes to increase the generation capacity of the Luri project to 700 MW from the originally envisaged 465 MW, by shifting the site of dam upstream the Satluj.

As per the pre-feasibility report prepared by the Himachal Pradesh State Electricity Board, the project was to have an installed capacity of 465 MW. The dam was to be constructed at Nathan, 11 km downstream Luri, and the power house near Tattapani, 4 km upstream the Chaba project. It involved construction of a 16 km long head-race tunnel.

Engineers of the SJVN have worked out that if the dam is constructed around Sainj instead of Nathan, the installed capacity will be increased by about 235 MW. The length of the head-race will increase to 27 km. The height of the dam will be restricted to 80m to keep the level of the reservoir well below the tailrace of the upstream Rampur project which is also being executed by the SJVN.

The project is being designed for a higher discharge than the 1500 MW Nathpa-Jhakri project as it will also utilise the water of six streams which join the Sutlej between Nathpa and Sainj. The Nathpa-Jhakri project has been designed for a discharge of 383 cusecs, whereas for the Luri project it will be 477 cusecs.

SJVN is also preparing the detailed project report of the 400 MW Khab project to be set up upstream the 1,500 MW Nathpa-Jhakri project in Kinnaur.

← All latest storiesBack to top →