Illustrative image – not actual.A team of consultants, appointed by the Indian Ports Association (IPA), is currently conducting a feasibility study for a deep-draft berth at Paradip port to handle large volumes of iron ore traffic for exports.
The team comprises Mr A Chakraborty (former Managing
Director of IPA), Mr D Mishra (former Traffic Manager of Paradip port), Mr A C
Chatterjee (former Chief Engineer of Kolkata port) and Mr A K Chandra (adviser
to IPA). The team has already submitted a preliminary report on the project and
the final report is expected by the end of 2002.
In the first phase, the capacity of the berth would be
enough to handle 4,000 tonnes per hour. This capacity would be gradually increased,
depending on the situation.
Over the past few years, ore export through Paradip
port has been increasing. This is depicted in the following table:
|
Year |
Exported
Qty (million tns) |
|
2004-05 |
* 8 |
|
2002-03 |
* 6 |
|
2001-02 |
3.5 |
|
2000-01 |
2.99 |
|
1999-2000 |
1.02 |
*
projected exports
However, the projected increase in ore traffic would be
difficult to achieve unless large vessels, preferably Capesize vessels with
full load (an estimated 1,50,000 tonnes), would be able to call at the port.
But, the port's present iron ore berth, which is more
than 30 years old, would not be able to handle such large vessels as the depth
of the basin at the berth enables handling of vessels requiring maximum draft
up to 13 metres whereas a Capesize vessel would required at least a 17-metre
draft. Further, dredging would not improve the situation due to certain structural
constraints. Thus there are plans to develop a deep-draft berth at the port.
